EpicVape E-Nano: Tips and Cleaning Guide

The EpicVape E-Nano log vaporizer leaves loads of room for experimenting, and is kind of straightforward to choose up and begin utilizing. We’ve spent loads of time taking part in with it, and have discovered a handful of suggestions so that you can take the expertise additional.

EpicVape E-Nano Suggestions and Tips: Use the E-Decide

We rave concerning the adjustable stems in our Full E-Nano Overview, and the E-Decide multitool is the important thing to its success. Most of you in all probability have a stir device helpful, however this multitool eliminates the guesswork when adjusting the stem. It comes with two separate tips for mid sized masses and small microdoses. Insert the device so far as it should go for normal doses, and use the small notch about half an inch from the underside for microdoses.

Sluggish and regular wins the race

Convection vaporizers carry out at their finest when the air has sufficient time to soak by way of and vaporize the load. The E-Nano is not any exception, however fortunately, it may well sustain with nearly any draw pace you throw at it. Every vaporizer has its personal candy spot although, and we discovered that the E-Nano’s lies inside a medium, relaxed draw for the best possible vapor manufacturing.

While you take a tough pull, you’ll really feel your chest tighten up because the resistance will increase. The prime draw pace sits proper earlier than any chest rigidity creeps in, with a slower, extra relaxed really feel. We discovered this to work properly with each small and huge doses, however we encourage you to experiment with it as you mess around with completely different load sizes.

The way to microdose

Environment friendly microdosing is among the E-Nano’s hottest options, and we extremely suggest you give it a go. You’ll need to begin by adjusting the bowl, so seize one thing like a chopstick and push the display screen to the highest of the stem. Then, use the E-Decide multitool to push the display screen down till the sting of the glass touches the primary little lip/notch on the device.

Microdoses begin at round .02 grams of floor herb, and it doesn’t seem like a lot in any respect. When tamped down into the stem, it sits simply above the heater with out touching, and might be essentially the most you’ll have the ability to load with out singeing. In case you don’t have a scale, merely fill sufficient to cowl the underside of the display screen and provides it a comfortable tamp. So long as the herbs aren’t touching the heater, you’ll be good to go. Give it just a few quick sips, or extract every little thing in a single lengthy pull!

The way to vape bigger doses

In case you’re not into the tinier doses, let’s enterprise to the other finish of the spectrum and fireplace up some bigger masses. We talked about nice experiences with masses as large as 1 / 4 gram, so we’ll shoot for round there. With the glass stem, take your chopstick and push the basket display screen down about an inch and a half from the highest, proven beneath:

Fill the stem with sufficient herb to sit down a little bit greater than half an inch from the highest, and provides it a comfortable tamp. It’s actually vital to not tamp it down an excessive amount of with these bigger masses so the air has sufficient room to move evenly by way of the fabric. These larger masses do properly with just a few stirs in between, so we encourage you to take action. Your herbs will shrink as they prepare dinner, and you may push the basket display screen up as your session goes on, to maintain the herbs close to the heater. 

Strive loading entire nuggets

The E-Nano’s capacity to focus on the flavorful traits of your herbs needs to be in your checklist of causes to seize this vaporizer. You’ll expertise terpene-rich goodness with floor materials, however loading it up with entire nuggets is the way in which to go. You lose a number of treasured crystals whenever you grind, so minimize this course of out for full spectrum, natural flavors.

With the stem set to its common load dimension, take a small chunk of fabric and push it to the underside. We wish the air to journey by way of the bud, and never round it, so give it a comfortable tamp to shut up the perimeters round it. We’re highlighting the flavour right here, so anticipate tasty however wispy vapor on the primary few hits. I’ll often break it up and stir after three or 4 hits, and that’s when the vapor manufacturing actually takes off.

Seize the gong attachment

One of many solely complaints we’ve with the E-Nano is that it may well really feel a bit too scorching on the throat when vaping at larger temperatures. The Adjustable GonG Attachment (water pipe adapter) solves this challenge with water-cooled hits that spherical off the expertise completely. In case you don’t have a glass rig to hook as much as, seize the Lengthy Adjustable Stem as a substitute to chill the vapor down.

The way to use concentrates

As talked about in our EpicVape evaluate, this vaporizer does very properly with concentrates. To ensure the perfect expertise, we suggest just a few equipment:

Substitute the basket display screen within the stem with the focus insert and place a rice-grain dimension quantity of fabric onto the pad. Throw the heater on and revel in!

EpicVape E-Nano Cleansing Information

The EpicVape E-Nano may be the simplest vaporizer to wash and preserve. With just a few steps from begin to end, you’ll have your vape working with a clear slate very quickly.

Soak and brush

You’ll solely want just a few home items for this cleansing.

• Rubbing alcohol
• A big zip-lock bag
• A small brush

Since a lot of the motion takes place contained in the glass stems, deep cleanings require nothing greater than soaking them for just a few hours. Take away the silicone grips and put the stems in a big zip-lock bag of rubbing alcohol. Give it just a few light shakes, and allow them to sit for just a few hours. Rinse, dry, and that’s it!

In case you have a tendency to depart your vape on for a lot of the day, leftover bits on the heater or within the properly could create a sticky mess. Get into the behavior of dismissing the heater and dumping out any bits that fell into the properly after every session.