If you’re utilizing your Puffco Height Pro as long as we are, a deep cleansing is simply around the bend. We’ll stroll you with all the actions to a fresh, tidy vaporizer.

Puffco Height Pro Cleansing Overview: What you’ll require

Cleansing your Peak Pro will just need these couple of family products

  • Scrubing alcohol
  • Little meal or bag for saturating

Take Apart

The Peak Pro requires little disassembly for a deep cleansing. The chamber remains with each other as one item, so loosen it with a counterclockwise spin from the base as well as established it apart. Eliminate the glass carbohydrate cap insert from the rubber item as well as established it sideways too. After that, remove the bubbler by drawing it up as well as far from the base up until it displaces, as well as unload out the filthy water.

puffco peak pro cleaning disassembled 1024x1024 - Puffco Peak Pro Cleaning and Maintenance Guide

Soak as well as rinse

Take your tiny container as well as saturate the chamber as well as carbohydrate cap in scrubing alcohol for a couple of hrs. After that, take the bubbler as well as load it a little under midway with alcohol. Cover the leading with one hand as well as offer it a great shake to relax any type of crud.

puffco peak pro cleaning soaking 1024x1024 - Puffco Peak Pro Cleaning and Maintenance Guide

Accumulation might take place inside the consumption opening, so load it with scrubing alcohol as well as offer it a great shake too. Challenging messes might require a longer saturate. When whatever behaves as well as tidy, offer the bubbler an extensive rinse as well as establish all the items bent on completely dry.

puffco peak pro cleaning intake hole 1024x1024 - Puffco Peak Pro Cleaning and Maintenance Guide
You might locate some crud inside the consumption opening.

Reassemble

When whatever is entirely dry, take the bubbler as well as load it up with water, simply past the inner air shaft. After that, line the air shaft under of the glass with the inner airpath on the base, as well as press as well as protect it back right into location.

puffco peak pro cleaning reassembly 1024x1024 - Puffco Peak Pro Cleaning and Maintenance Guide
Align the consumption openings as well as press it right into location.

Slide the rubber seal around the carbohydrate cap and afterwards take the chamber as well as screw it clockwise onto the base up until it behaves as well as limited. It ought to just take a quarter turn.

puffco peak pro cleaning chamber 1024x1024 - Puffco Peak Pro Cleaning and Maintenance Guide

Run a burnoff

Prior to your following session, run a burnoff for a last clean of any type of remaining deposit. Transform your Peak Pro on as well as establish it to any type of temperature level. Double-click and afterwards allow it run a complete session prior to packing up your very first hit.

puffco peak pro cleaning burnoff 1024x1024 - Puffco Peak Pro Cleaning and Maintenance Guide

Tips for cleaner vape

To maintain your Peak Pro cleaner for much longer, attempt not to fill even more concentrate than you’ll utilize in a session. Lots that do not entirely evaporate will certainly stick as well as strengthen inside the chamber. After each hit, clear out the chamber with a cotton bud prior to any type of remaining deposit hardens. Very same point with the glass – wash out as well as change the water after a couple of sessions to maintain it wonderful as well as tidy.